Black & White Facilities / Service area
Commercial Roof Repairs and Maintenance in Newcastle and the North East
Investigate roof leaks, repair damaged coverings and flashings, or plan gutter maintenance and roof renewal for commercial buildings in Newcastle and the North East. We connect the roof defect with the spaces below, agree safe access and sequence the work around building operations and weather conditions.
Individual services
13 services
Illustration Emergency Roof Repairs: Make a damaged roof safe, limit water entry and define the permanent repair that follows.
Illustration Flat Roofing: Repair, overlay or renew flat-roof build-ups, including perimeters, outlets and penetrations.
Illustration Gutters and Downpipes: Clear, repair or replace the gutters, outlets and downpipes that carry rainwater to the drains.
Illustration Industrial Roofing and Cladding: Repair or refurbish roof and wall sheeting on industrial units, planned around production and fragility.
Illustration Leadwork and Flashings: Repair or renew the weathering details at abutments, chimneys and openings where materials meet.
Illustration Liquid-Applied Roofing: Apply a specified liquid membrane to a prepared substrate, with penetrations and upstands detailed in.
Illustration Metal and Sheet Roofing: Replace or repair sheet coverings using matching fixings, lap details and edge weatherings.
Illustration Pitched Roofing: Repair or re-cover pitched roofs, including their ridge, verge and abutment details.
Illustration Roof Access and Safety Systems: Plan and look after the arrangements that get staff and contractors onto a roof and back safely.
Illustration Roof Inspections and Leak Detection: Survey roof condition and trace water-entry routes so repairs are instructed on evidence.
Illustration Roof Replacement: Deliver full roof renewal as a managed project, with build-up, phasing and weather protection agreed first.
Illustration Roof Waterproofing: Repair or replace the waterproof layer and its terminations as one specified system.
Illustration Rooflights: Repair or replace rooflights where glazing has failed, seals leak or daylighting needs have changed.
Start with roof inspections and leak detection, or see flashings and leadwork and gutters and downpipes. Report an existing defect through reactive maintenance.
Our full service catalogue, including every individual service, is available across every listed sector and location. For one site or several, we agree the scope, access and programme around the buildings concerned.
Examples delivered by Property Services
This example was delivered by the separate Black & White Property Services business. A managed residential building in Whitley Bay needed renewed felt flashings where its roof met a parapet wall. Black & White Property Services re-felted the identified flashing area, with tower access included in the scope. The specified roof-junction repair was completed. Targeted parapet flashing repairs in Whitley Bay.
This example was delivered by the separate Black & White Property Services business. A Blyth property needed repairs around the junction between its chimney and roof. Black & White Property Services removed cement fillets, fitted lead aprons and stepped flashings, completed local repointing and cleared gutters on both sides. The specified leadwork and associated roof-maintenance tasks were completed together. Chimney leadwork and associated roof repairs in Blyth.
Which service do you need?
Where water is getting in but nobody can say from where, start with an inspection and leak-detection instruction. A contained defect can go straight to repair; a roof with a long repair history is better assessed for renewal, deck and insulation included. Describing what the building is doing beats picking a service by its title, and roof plans, old job sheets and photographs shorten the route to the right one.
Repairs, maintenance and projects
A one-off instruction covers a single defined job. Recurring inspections, gutter clearance and condition-led attention across an estate sit better under a maintenance arrangement; larger changes with a brief, programme and handover run as projects. Most portfolios use all three; keeping reactive items apart from planned investment makes the budget easier to defend.
Planning the work
Access, edge protection, fragile surfaces, the weather and whatever is operating underneath all need considering before anyone goes up; HSE guidance is clear that even a short repair needs a planned safe system of work. Agree the site contact, the hours the operation can tolerate, the job reference and who can vary the scope, and state what is excluded and what records are expected at handover.
Work across sectors
Occupancy and access shape the method as much as the roof does: finishes and desks below an office, term dates at a school, quiet hours at a hotel, production and fragile sheeting on an industrial unit. The sector pages show how the service range adapts to each type of building.
Locations covered
Sites across North East England are covered, including Northumberland, Tyne and Wear, County Durham and Tees Valley, and towns and cities such as Newcastle, Gateshead, Durham and Middlesbrough. Give the postcode, access arrangements and any site-specific restrictions; the location pages list the areas served in more detail.
Frequently asked questions
Do I need to pick a service before I enquire?
No. Explain the symptom, the areas affected and the outcome you want. If the source of water is unclear an investigation comes first; a defined defect can go straight to repair; a roof near the end of its life is assessed for renewal, layers beneath included.
Can I combine several roofing tasks in a single instruction?
Yes, where they are related. The scope then names the trades, the order of work and who is responsible for each part, and each item carries its own site and asset reference so it can be tracked and invoiced line by line.
What drives the cost?
The work itself, the roof's condition, how it is reached, the materials and plant required and any operating restrictions. Height, access protection, weather and what is found beneath the surface can all move the programme.
What should the first enquiry include?
The site address, a brief description, safe photographs and any existing report, plus when access is possible, who will sign off the instruction and the result you are looking for.
Guides and practical advice
The flat-roof replacement guide covers preparation and decision points across roofing work, and the repair versus replacement guide weighs condition, cost and disruption when an asset is at a crossroads. Official guidance adds the wider context for planning roof work safely.
Related content
See the full service list, maintenance, projects, sectors, locations and the knowledge centre. Where roofing is one part of a wider managed contract, facilities management describes that arrangement.
Make an enquiry
Contact Black & White Facilities with the site or portfolio in question, its priority, the local contact and any records you hold, and set out what needs to change and the constraints on site so the next step can be agreed against the actual building.
Discuss the scope
Tell us what needs attention.
Share the site, the issue and any access requirements so we can discuss the next step.